POWER GENERATION

I、Thermal Power Generation

In recent years, with the increasing of national environmental standards and the public awareness of the environment, the new power plant will be required flue gas desulfurization project to prevent air pollution.

Chimney

Flue gas wet desulfurization causes to corrosion for the chimneys. Titanium clad steel plate made inner cylinder is one of the most effective method to prevent corrosion. Add a steel alloy or titanium layer on the inside plate by explosive welding with metallurgical bonding, can anti-corrosion effectively while saving cost.

Condensers

Modern condensers are designed with using of different metal alloys. They need to be bond in reliable way. The best choice is to use explosion welding technology that allows to get transition pieces made of dissimilar metal alloys. Phohom has developed four kinds of tubular transition joints for manufacture of condensers. They are used to connect tube and container or other part of condensers.

Through the explosive bonding technology, metallurgical composite the corrosion-resistance titanium plate with steel plate to against external forces . So the pipe plate both have the matrix material strength, materials saving and more environmentally friendly.

Coal machine, coal duct

Coal handling machine, coal pipes, transport trough, mill linings, fan blades and other equipment and spare parts, in the harsh operating environment of coal field, require corrosion resistance and abrasion resistance . The wear-resistant alloy steel metallurgical complex with another steel, which can provide strength, ductility and resistance to significant mechanical loadings can improve the overall performance in economically reasonable and environmentally friendly ways.

II、The Hydropower Generation

Demands for clad plates in hydropower generation began on the agenda in a surprising number. Each large-scale hydroelectric power plant takes about 200 tons of clad steel mainly used for silos, hoppers, chutes, dehydration and other parts.

Nickel martensitic stainless steel and clad steel

In hydropower industries, the liners for sand flushing and stream diversion bottom hole, steel-lined corridors, gate and lock, made of stainless steel composite materials for high wear resistance, impact resistance and adequate corrosion resistance.

Steel gates supporting rail

Steel material resist external forces with high strength , toughness and plasticity are selected as base material , and material with high hardness and good resilience are chosen as working face. The metal explosion clad plate is provided with the abrasion resistance save the amount of copper, reduce production costs, and wear parts is integral with better toughness and ductility.